15 Christmas Tree Topper Ideas to Crown Your Tree
Introduction
A Christmas tree topper is the finishing piece — the star, angel, bow or finial that crowns the top of the tree and ties the whole look together. Get it right and the tree looks complete; get it wrong and the top looks bare or, worse, the topper leans like it is about to fall off.
The simplest sizing rule: your topper should be roughly one-tenth of your tree’s height. A 7-foot tree takes a topper around 8 inches tall, while a 6-foot tree suits one around 7 inches. Too small and it disappears into the branches; too big and it overwhelms the tree. The fifteen Christmas tree topper ideas below cover every style, and the last one shows how to attach any topper so it stays straight. If you are still planning the rest of the tree, our Christmas tree decor ideas cover ornaments, garland and lights, and our Christmas tree themes will help you pick a look to match.
1. Classic Gold Star
The classic gold star is the topper most of us grew up with, and it still works on almost any tree. A simple five-point star in brushed or shiny gold reads clearly from across the room and matches warm white lights, red ornaments and gold garland without competing with any of them.
Choose a star with a hollow cone or clip base that slides over the top branch rather than a flat star that needs taping. The cone base hides the bare tip of the tree and gives the star something solid to sit on. On a tree with a full, traditional look, a gold star is the safest pick you can make — it never looks dated and it never clashes.

2. Lighted Angel
A lighted angel brings a soft glow to the very top of the tree, which is exactly where most trees go dark. The angel’s dress usually hides a small bulb or a string of tiny lights, so the top of the tree lights up instead of fading into the ceiling.
Pick an angel in white, cream or soft gold so the light shines through the fabric rather than getting swallowed by dark colors. Angels suit traditional and vintage trees best, and they look especially good on taller trees where the topper sits high enough to be seen from the doorway. Check that the cord reaches your light string or a nearby outlet before you buy.

3. Oversized Velvet Bow
An oversized velvet bow is the boldest way to crown a tree, and it works best on trees with a strong color story. A big bow in deep red, emerald or burgundy velvet reads like a ribbon wrapping the whole tree, and it photographs beautifully.
Make the bow yourself from wired ribbon if you want it to hold its shape — wired edges let you fluff the loops and keep them from collapsing over the season. The bow should be about as wide as the topper rule allows, roughly one-tenth of the tree height, and the tails should drape down a foot or so into the top branches. It pairs naturally with velvet ribbon garland further down the tree.

4. Rustic Twig Star
A rustic twig star suits farmhouse, woodland and cabin-style trees better than anything shiny. Made from gathered twigs, grapevine or thin branches tied into a star shape, it has a handmade, outdoorsy feel that matches burlap ribbon, pinecones and wooden ornaments.
The twig star is light, so it is easy to attach, but its open shape means the bare tree tip can show through — tuck a little greenery or a small pine sprig behind it to fill the gap. You can buy one ready-made or make it in an afternoon from pruned branches. Either way, keep it simple: the charm is in the rough, natural texture, not in added glitter.

5. Crystal Snowflake Topper
A crystal snowflake topper is the right choice for a white, silver or winter-themed tree. The faceted crystal catches the tree lights and throws tiny sparkles across the ceiling, which makes the whole top of the tree feel brighter without adding another light string.
Look for a snowflake with a sturdy center post or a clip base — flat snowflake ornaments meant for hanging will flop sideways on top of a tree. Clear crystal works on any color scheme, while an iridescent finish picks up the colors around it. This topper is also one of the few that looks just as good on a slim or pencil tree, where a big star would overwhelm the narrow top.

6. DIY Paper Star
A DIY paper star is the cheapest topper on this list and one of the most personal. Folded from kraft paper, scrapbook paper or even old maps, a three-dimensional paper star adds a handmade touch that store-bought toppers cannot match — and kids can help make it.
The classic five-point folded star takes about twenty minutes and a sheet of sturdy paper; there are free templates online for every size. Use cardstock rather than printer paper so the points hold their shape for the whole season. A kraft paper star looks right at home on a Scandinavian or minimalist tree, while patterned paper suits a playful, colorful one. Seal it with a light spray of clear sealer if your tree sits near a humidifier.

7. Vintage Glass Finial
A vintage glass finial is a tall, teardrop-shaped piece of blown glass that sits on the tree like a jewel. Finials come in mercury glass, hand-painted designs and deep jewel tones, and they were the standard topper on Victorian and mid-century trees long before plastic stars took over.
Because glass is heavy for its size, a finial needs a firm attachment — wire it to the top branch rather than just sliding it on. Check antique shops and estate sales for real vintage pieces, or buy a new mercury-glass finial for the same look without the fragility worry. One finial on a tree with vintage ornaments pulls the whole nostalgic look together.

8. Floral and Berry Topper
A floral and berry topper skips the star entirely and crowns the tree with a spray of flowers, berries and greenery. Poinsettias, amaryllis, red berries and eucalyptus arranged in a fan shape give the tree a lush, garden-like finish that works especially well on trees with a natural or woodland theme.
Build it from floral picks rather than a single piece: push three or four picks into the top branches at different angles so the arrangement looks full from every side. Use a mix of one flower type, one berry type and one greenery type — more than that starts to look messy. This topper is also easy to refresh each year by swapping the flower color to match a new theme.

9. Antler Topper
An antler topper is the most unexpected idea on this list, and it is perfect for a rustic lodge, hunting cabin or woodland tree. A single small antler — real shed antler or a realistic resin replica — wired upright at the top of the tree makes a bold, outdoorsy statement that no star can match.
Keep the antler small, no more than 8 to 10 inches, so it stays in proportion and does not make the tree top-heavy. Pair it with burlap ribbon, pinecones, plaid ornaments and warm white lights for a full lodge look. If real antlers are hard to find, resin replicas are lighter, cheaper and easier to wire on — and nobody can tell the difference from across the room.

10. Lighted Starburst Topper
A lighted starburst topper is a modern take on the classic star: a burst of thin metal rays or fiber-optic strands radiating from a bright center, usually lit from within. It looks like a firework frozen at the top of the tree, and it is the best choice if your tree’s top always looks dark.
The starburst works best on contemporary, glam or metallic trees — gold, silver or black-and-gold themes especially. Because it is wider than a standard star, measure your ceiling clearance first: a starburst on a 7-foot tree under an 8-foot ceiling can look crowded. Battery-operated versions avoid an extra cord running down the tree, which keeps the top clean.

11. Monogram Letter Topper
A monogram letter topper puts your family’s initial at the top of the tree — a simple, personal finishing touch. A large wooden, metal or glittered letter in your surname initial, wired to the top branch, turns the tree into something that feels unmistakably yours.
Choose a letter at least 6 inches tall so it reads clearly from across the room, and pick a finish that matches your tree: gold glitter for a glam tree, natural wood for farmhouse, matte black for modern. This topper also makes a great gift for a newly married couple or a family in a new home. Add a small bow or a sprig of greenery at the base of the letter to soften the look.

12. Feather Topper
A feather topper is soft, light and dramatic — a cluster of feathers fanning out from the top of the tree like a plume. White feathers suit a winter or glam tree, while natural pheasant or peacock feathers fit a woodland or jewel-toned tree.
Feathers are almost weightless, so attachment is easy, but they are also fragile: keep them away from curious pets and small hands, and do not place the tree where a draft from a vent will ruffle them all season. A feather topper works best as the single dramatic element on the tree — if the topper is feathers, keep the ornaments simpler so the two do not compete.

13. Mini Topper for Small and Apartment Trees
Small trees need small toppers, and a full-size star on a 4-foot apartment tree looks like a hat two sizes too big. For tabletop and apartment trees, pick a mini topper: a small star, a tiny bow, a single pinecone cluster or a small finial no more than 4 to 5 inches tall.
The same one-tenth rule applies — a 4-foot tree takes a topper around 5 inches. Mini toppers are also lighter, which matters because small trees have thinner top branches that bend under a heavy topper. If your tree is a tabletop model, a tiny velvet bow or a small wooden star keeps the proportions right and the tree standing straight.

14. Bow and Picks Combo Topper
A bow and picks combo topper layers a bow with decorative picks — glitter branches, berry sprays, pine sprigs or curly willow — to make a full, dimensional crown instead of a single object. The bow gives it structure and the picks give it height and texture, so the top of the tree looks finished from every angle.
Start with the bow as the anchor, wire it firmly to the top branch, then push picks in behind and beside it at different angles. Three to five picks is usually enough; more than that turns into a bush. Match the pick colors to your ornaments — gold picks on a gold tree, red berries on a red-and-green tree — and let the tails of the bow drape down into the top branches to tie it together.

15. How to Size and Attach a Topper So It Stays Straight
The best topper in the world looks bad if it leans, so sizing and attaching matter as much as style. Use the one-tenth rule: the topper should be roughly one-tenth of the tree’s height — about 7 inches on a 6-foot tree, 8 inches on a 7-foot tree. Measure the topper itself, not the packaging, and do not count long ribbon tails in the height.
To attach it, trim the top branch to a short, sturdy stub about 4 inches long — a long, bendy tip is the main reason toppers lean. Slide a cone-base topper over the stub, then wrap floral wire around the base and the branch in two places. For heavy glass finials, add a second wire higher up. Check from across the room, not just up close, and adjust before the ornaments go on.

Frequently Asked Questions
How big should a Christmas tree topper be?
A Christmas tree topper should be roughly one-tenth of the tree’s height — about 7 inches on a 6-foot tree and 8 inches on a 7-foot tree. A topper much smaller disappears into the branches, while one much larger overwhelms the tree and makes the top look heavy.
How do I keep my tree topper from leaning?
Trim the top branch to a short, sturdy stub about 4 inches long, slide the topper over it, and wrap floral wire around the base and the branch in two places. A long, bendy tip is the main reason toppers lean. For heavy glass toppers, add a second wire higher up for extra support.
What is the most popular Christmas tree topper?
The classic star is still the most popular Christmas tree topper, followed by the angel. Stars suit almost any theme, angels suit traditional and vintage trees, and oversized bows have become the most popular modern choice in the last few years.
Can I use a regular ornament as a tree topper?
You can, but a regular ornament usually lacks a base that fits over the top branch, so it tends to flop sideways. If you want to use one, pick a lightweight ornament with a loop or clip, wire it firmly to a trimmed top stub, and tuck greenery behind it to hide the attachment.
What topper works best on a small apartment tree?
A mini topper no more than 4 to 5 inches tall works best on a small apartment tree — a tiny star, a small velvet bow or a small wooden star. The same one-tenth rule applies, and lighter toppers matter because thin top branches on small trees bend easily under weight.
Related Reading
- Christmas Tree Decor Ideas 2026: 12 Stunning Styles
- 12 Stunning Christmas Tree Themes for 2026
- Christmas Garland Ideas
- Christmas Mantel Decor Ideas
- Christmas Living Room Decor Ideas 2026: 12 Cozy Styles
- Christmas Window Decor Ideas
Conclusion
The right Christmas tree topper is the piece that makes the whole tree look finished — and it does not need to be the most expensive thing on the tree. Pick a style that matches your theme, size it to roughly one-tenth of your tree’s height, and wire it on so it stays straight all season. A classic gold star, a velvet bow or a handmade paper star all work, as long as the topper fits the tree and the tree fits your home.







